Rendering.ScriptableRenderContext.BeginScopedRenderPass

Unity · Версия 2020.3 LTS · Scripting · ScriptableRenderContext

Rendering.ScriptableRenderContext.BeginScopedRenderPass

Объявление

public Rendering.ScopedRenderPass BeginScopedRenderPass(int width, int height, int samples, NativeArray attachments, int depthAttachmentIndex);

Параметры

width Ширина поверхностей прохода рендеринга в пикселях.
height Высота поверхностей прохода рендеринга в пикселях.
samples количество выборок MSAA; установите значение 1, чтобы отключить сглаживание.
attachments Массив прикрепленных цветов для использования в этом проходе рендеринга. Значения в массиве копируются немедленно.
depthAttachmentIndex Индекс вложения, который будет использоваться в качестве буфера глубины/трафарета для этого прохода рендеринга, или -1, чтобы отключить глубину/трафарет.

Описание

Планирует начало нового прохода рендеринга. Если вы называете это оператором использования, Unity автоматически вызывает EndRenderPass при выходе из блока использования. В каждый момент времени может быть активен только один проход рендеринга.

Этот метод делает то же самое, что и BeginRenderPass, но возвращает IDisposable, который можно использовать в using , поэтому нет необходимости вручную вызывать EndRenderPass.

Проход рендеринга предоставляет новый способ переключения целей рендеринга в контексте конвейера рендеринга с поддержкой сценариев. В отличие от функции SetRenderTargets, проход рендеринга указывает четкое начало и конец рендеринга, наряду с явными действиями загрузки/сохранения на поверхностях рендеринга.

Проход рендеринга также позволяет запускать несколько подэтапов в рамках одного прохода рендеринга, где пиксельные шейдеры имеют доступ для чтения к текущему значению пикселя в проходе рендеринга. Это позволяет эффективно реализовывать различные методы рендеринга на тайловых графических процессорах, например отложенный рендеринг.

Проходы рендеринга изначально реализованы в Metal (iOS) и Vulkan, но API полностью функционален на всех бэкэндах рендеринга посредством эмуляции (используя устаревшие вызовы SetRenderTargets и считывая текущие значения пикселей с помощью выборки текселей).

Механизм прохода рендеринга имеет следующие ограничения:

  • Все прикрепленные файлы должны иметь одинаковое разрешение и количество выборок MSAA.
  • Результаты рендеринга предыдущих подэтапов доступны только в пределах одного и того же пикселя экранного пространства. координировать через макрос UNITY_READ_FRAMEBUFFER_INPUT(x) в шейдере; вложения не могут быть связаны в виде текстур или иным образом, пока не завершится проход рендеринга
  • iOS Metal не позволяет считывать данные из Z-буфера, поэтому для решения этой проблемы требуется дополнительная цель рендеринга.
  • Максимальное количество вложений, разрешенных для одного прохода рендеринга, в настоящее время составляет 8 + глубина, но обратите внимание, что различные графические процессоры могут имеют более строгие ограничения.

Смотрите так же: BeginScopedSubPass.

using UnityEngine;
using UnityEngine.Rendering;
using Unity.Collections;

public static class DeferredRenderer
{
    public static void ExecuteRenderLoop(Camera camera, CullingResults cullResults, ScriptableRenderContext context)
    {
        // Create the attachment descriptors. If these attachments are not specifically bound to any RenderTexture using the ConfigureTarget calls,
        // these are treated as temporary surfaces that are discarded at the end of the renderpass
        var albedo = new AttachmentDescriptor(RenderTextureFormat.ARGB32);
        var specRough = new AttachmentDescriptor(RenderTextureFormat.ARGB32);
        var normal = new AttachmentDescriptor(RenderTextureFormat.ARGB2101010);
        var emission = new AttachmentDescriptor(RenderTextureFormat.ARGBHalf);
        var depth = new AttachmentDescriptor(RenderTextureFormat.Depth);

        // At the beginning of the render pass, clear the emission buffer to all black, and the depth buffer to 1.0f
        emission.ConfigureClear(new Color(0.0f, 0.0f, 0.0f, 0.0f), 1.0f, 0);
        depth.ConfigureClear(new Color(), 1.0f, 0);

        // Bind the albedo surface to the current camera target, so the final pass will render the Scene to the screen backbuffer
        // The second argument specifies whether the existing contents of the surface need to be loaded as the initial values;
        // in our case we do not need that because we'll be clearing the attachment anyway. This saves a lot of memory
        // bandwidth on tiled GPUs.
        // The third argument specifies whether the rendering results need to be written out to memory at the end of
        // the renderpass. We need this as we'll be generating the final image there.
        // We could do this in the constructor already, but the camera target may change on the fly, esp. in the editor
        albedo.ConfigureTarget(BuiltinRenderTextureType.CameraTarget, false, true);

        // All other attachments are transient surfaces that are not stored anywhere. If the renderer allows,
        // those surfaces do not even have a memory allocated for the pixel values, saving RAM usage.

        // Start the renderpass using the given scriptable rendercontext, resolution, samplecount, array of attachments that will be used within the renderpass and the depth surface
        var attachments = new NativeArray<AttachmentDescriptor>(5, Allocator.Temp);
        const int depthIndex = 0, albedoIndex = 1, specRoughIndex = 2, normalIndex = 3, emissionIndex = 4;
        attachments[depthIndex] = depth;
        attachments[albedoIndex] = albedo;
        attachments[specRoughIndex] = specRough;
        attachments[normalIndex] = normal;
        attachments[emissionIndex] = emission;
        using (context.BeginScopedRenderPass(camera.pixelWidth, camera.pixelHeight, 1, attachments, depthIndex))
        {
            attachments.Dispose();

            // Start the first subpass, GBuffer creation: render to albedo, specRough, normal and emission, no need to read any input attachments
            var gbufferColors = new NativeArray(4, Allocator.Temp);
            gbufferColors[0] = albedoIndex;
            gbufferColors[1] = specRoughIndex;
            gbufferColors[2] = normalIndex;
            gbufferColors[3] = emissionIndex;
            using (context.BeginScopedSubPass(gbufferColors))
            {
                gbufferColors.Dispose();

                // Render the deferred G-Buffer
                // RenderGBuffer(cullResults, camera, context);
            }

            // Second subpass, lighting: Render to the emission buffer, read from albedo, specRough, normal and depth.
            // The last parameter indicates whether the depth buffer can be bound as read-only.
            // Note that some renderers (notably iOS Metal) won't allow reading from the depth buffer while it's bound as Z-buffer,
            // so those renderers should write the Z into an additional FP32 render target manually in the pixel shader and read from it instead
            var lightingColors = new NativeArray(1, Allocator.Temp);
            lightingColors[0] = emissionIndex;
            var lightingInputs = new NativeArray(4, Allocator.Temp);
            lightingInputs[0] = albedoIndex;
            lightingInputs[1] = specRoughIndex;
            lightingInputs[2] = normalIndex;
            lightingInputs[3] = depthIndex;
            using (context.BeginScopedSubPass(lightingColors, lightingInputs, true))
            {
                lightingColors.Dispose();
                lightingInputs.Dispose();

                // PushGlobalShadowParams(context);
                // RenderLighting(camera, cullResults, context);
            }

            // Third subpass, tonemapping: Render to albedo (which is bound to the camera target), read from emission.
            var tonemappingColors = new NativeArray(1, Allocator.Temp);
            tonemappingColors[0] = albedoIndex;
            var tonemappingInputs = new NativeArray(1, Allocator.Temp);
            tonemappingInputs[0] = emissionIndex;
            using (context.BeginScopedSubPass(tonemappingColors, tonemappingInputs, true))
            {
                tonemappingColors.Dispose();
                tonemappingInputs.Dispose();

                // present frame buffer.
                // FinalPass(context);
            }
        }
    }
}

Обновлено 17 ноября 2026 г.