Playables.PlayableGraph.Connect

Unity · Версия 2020.3 LTS · Scripting · PlayableGraph

Playables.PlayableGraph.Connect

Объявление

public bool Connect(U source, int sourceOutputPort, V destination, int destinationInputPort);

Параметры

source Исходный playable или его дескриптор.
sourceOutputPort Порт, используемый в исходном воспроизводимом файле.
destination Пункт назначения playable или его дескриптор.
destinationInputPort Порт, используемый в целевом воспроизводимом файле.

Возвращает

bool возвращает значение true, если соединение установлено успешно.

Описание

Соединяет два экземпляра Playable.

Соединения определяют топологию PlayableGraph и способ ее оценки.

Игровые объекты можно объединять в древовидную структуру. Каждый Playable имеет набор входов и набор выходов. Их можно рассматривать как «слоты», к которым можно прикреплять другие Playables.

Когда Playable создается впервые, его счетчик входных данных сбрасывается до 0, что означает, что к нему не подключены дочерние Playable. Выходы ведут себя немного по-другому — каждый Playable имеет выход по умолчанию, созданный при первом создании.

Вы соединяете Playables вместе, используя метод PlayableGraph.Connect, и вы можете отключить их друг от друга, используя PlayableGraph.Disconnect.

There is no limit set on the amount of inputs a Playable can have.

using UnityEngine;
using UnityEngine.Animations;
using UnityEngine.Playables;

public class GraphCreationSample : MonoBehaviour
{
    PlayableGraph m_Graph;
    public AnimationClip clipA;
    public AnimationClip clipB;

    void Start()
    {
        // Create the PlayableGraph.
        m_Graph = PlayableGraph.Create();

        // Add an AnimationPlayableOutput to the graph.
        var animOutput = AnimationPlayableOutput.Create(m_Graph, "AnimationOutput", GetComponent<Animator>());

        // Add an AnimationMixerPlayable to the graph.
        var mixerPlayable = AnimationMixerPlayable.Create(m_Graph, 2, false);

        // Add two AnimationClipPlayable to the graph.
        var clipPlayableA = AnimationClipPlayable.Create(m_Graph, clipA);
        var clipPlayableB = AnimationClipPlayable.Create(m_Graph, clipB);

        // Create the topology, connect the AnimationClipPlayable to the
        // AnimationMixerPlayable.
        m_Graph.Connect(clipPlayableA, 0, mixerPlayable, 0);
        m_Graph.Connect(clipPlayableB, 0, mixerPlayable, 1);

        // Use the AnimationMixerPlayable as the source for the AnimationPlayableOutput.
        animOutput.SetSourcePlayable(mixerPlayable);

        // Set the weight for both inputs of the mixer.
        mixerPlayable.SetInputWeight(0, 1);
        mixerPlayable.SetInputWeight(1, 1);

        // Play the graph.
        m_Graph.Play();
    }

    private void OnDestroy()
    {
        // Destroy the graph once done with it.
        m_Graph.Destroy();
    }
}

Обновлено 17 ноября 2026 г.